Hotline: +49 (0)7227 994255-0
E-Mail: 
Rotary axis Sorotec 5M-6-100A
For the experienced CNC milling machine operator, a rotary axis is something like a new dimension: seemingly endless new possibilities arise when the workpiece can be rotated in the machine. Engraving round surfaces, for example, to name just one.
The rotary axis was developed by Mecheltron exclusively for Sorotec. It is driven by one of the company's proven, in-house stepper motors, and a toothed belt drive reduces the rotation at a ratio of 1:6. For full-step operation, this results in an angular resolution of 0.3°. The stainless steel protective cover can be easily removed by loosening just three screws on the top, leaving all important parts of the unit easily accessible for setup.
In the configurator you can put together a set to meet your individual needs.
Required accessories:
Three- or four-jaw chuck
Connection cable D-SUB9 or M16 7-pin
Optional accessories:
Tailstock FWD-65M
Technical specifications:
Designated chuck: Ø 100 mm
Max. speed: 90 rpm
Center height: 65 mm
Spindle bore: Ø 21 mm
Operating manual (german)Manufacturer: | Responsible person: |
| Safety instructions: | ||
 | 1. | Always read and observe the safety instructions and warnings in the available documents. |
| 2. | The installation, commissioning and operation require special knowledge of machines and their proper operation, as well as basic knowledge of electrical engineering. The instructions - including those in the descriptions - must be followed carefully. | |
| 3. | The location where machines are operated must ensure that unauthorized persons - especially children - do not have access without adequate supervision. | |
| 4. | The use of kits / components usually requires additional measures and additions. | |