Hotline: +49 (0)7227 994255-0
E-Mail: 
24 V Solenoid valve 1/8" 2/2
24 V Solenoid valve 1/8" 2/2
Direct acting 2-Way solenoid valve, normally closed, no minimum pressure required, connections with female thread G 1/8-28“, complete with push-in fittings for 6 mm hose, for 24 V DC operation, fully assembled.
This solenoid valve is widely-used in the control of air systems.
Technical Data:
| Operating voltage: | 24 V DC |
| Operating current: | 125 mA |
| Screw thread: | G 1/8 " | |
| Hose fitting: | 6 mm | |
| Working pressure: | 0 ... 8 bar | |
| Max. permissible pressure: | 12 bar | |
| Permissible fluids: | air, water, oil | |
| Working temperature: | -5 °C ... 80 °C | |
| Temperature rise coil: | 45 °C | |
| Orifice: | 2.5 mm | |
| Weight incl. packaging: | 255 g |
Lieferumfang:
- 1 × solenoid valve with coil
- 1 × plug for solenoid coil
- 2 × push-in fittings for 6 mm hose
DS_2V025-06-24VDC_210607_Soro.pdfManufacturer: | Responsible person: |
| Safety instructions: | ||
 | 1. | Always read and observe the safety instructions and warnings in the available documents. |
| 2. | The installation, commissioning and operation require special knowledge of machines and their proper operation, as well as basic knowledge of electrical engineering. The instructions - including those in the descriptions - must be followed carefully. | |
| 3. | The location where machines are operated must ensure that unauthorized persons - especially children - do not have access without adequate supervision. | |
| 4. | The use of kits / components usually requires additional measures and additions. | |