Hotline: +49 (0)7227 994255-0
E-Mail: 
Sorotec Alu-Line Heavy 1505 Parts Set
Due to the large dimensions, the Alu-Line Heavy series uses profiles and ball screws with larger cross-sections. On the X-axis, the 90 x 90 profile is replaced with a 180 x 90 profile to minimize deflection. Similarly, the central 16 mm ball screw is replaced with a 25 mm ball screw to prevent oscillation at high speeds. This ensures that the travel speed does not need to be reduced.
On the X-axis, two linear guide rails are also mounted on each side of the 180 mm profile to achieve even greater stability of the gantry.
The Heavy variant is supplied with a single central ball screw on the X-axis; the Heavy Gantry comes with two external ball screws.
This parts kit includes all the components needed for mechanical assembly. The drag chains and stepper motors are not included.
Optional gantry extensionAvailable Options:
- Portal extension to a clearance height of 320 mm and double portal side plates
- Portal extension to a clearance height of 420 mm and triple portal side plates
| Technical Data (Standard variant) | |
|---|---|
| Travel | X: 1550 mm Y: 550 mm Z: 220 mm |
| Clearance under Portal | 270 mm |
| Clamping area | X: 1900 mm Y: 550 mm |
| Dimensions | L: 1950 mm W: 960 mm H: 1080 mm |
| Linear guides | Blue Line HGR20 on all axes |
| Number of linear carriages | X: 2 x 4 Y: 4 Z: 3 |
| Ball screw spindles | Tolerance class T07 on all axes X: 25 x 20 mm Y: 16 x 10 mm Z: 16 x 05 mm |
 The mechanics is supplied in individual parts for self-assembly. The pictures show the fully assembled state.After completion, the sets of parts presented here represent what is referred to as "incomplete machines" in the Machinery Directive. For operation in accordance with the regulations, it must be completed with an enclosure and the module functional safety (operator protection). Also read this  Information sheet |
Scope of delivery
- Mechanics parts set
- Machined guide surfaces for linear guides
- HTD timing belts and pulleys
- Blue Line prestressed linear guides HGR20 and carriages
- Ball screw spindles
- Mechanical reference switches for all axes
- Complete set of screws
- Assembly instructions
- Stepper Motors
- Control units
- Vacuum Technology
- CAD/CAM - Software
- Spindles & Accessories
- Machine Housings and underframes
- Lubricating/Cooling Systems
- And many more...
Further information on extensions and accessories can be found here in the online shop.
Have we piqued your interest? Fancy more?
Contact us, we will be happy to advise you and provide you with an offer that meets your requirements.
You can reach us at
sorotec@sorotec.de+49(0)7227 994255-0
Machine parameter ALU-Line Heavy (german)Manufacturer: | Responsible person: |
| Safety instructions: | ||
 | 1. | Always read and observe the safety instructions and warnings in the available documents. |
| 2. | The installation, commissioning and operation require special knowledge of machines and their proper operation, as well as basic knowledge of electrical engineering. The instructions - including those in the descriptions - must be followed carefully. | |
| 3. | The location where machines are operated must ensure that unauthorized persons - especially children - do not have access without adequate supervision. | |
| 4. | The use of kits / components usually requires additional measures and additions. | |