Hotline: +49 (0)7227 994255-0
E-Mail: 
HF-Spindle ISEL 2.2 kW | SK20 | 20,000 rpm | 3 x 230 V | iSA2200
HF-Spindle ISEL 2.2 kW | SK20 | 20,000 rpm | 3 x 230 V | iSA2200
Technical Data:
- Performance: 2200 Watt
- Rpmr: 5,000 ... 20,000 1/min
- Torque at 18.000 1/min: 1.26 Nm
- Rated Voltage: 3 x 230 V
- Rated current: 7.6 A
- Cut-off frequency: 280 Hz
- Concentricity: 0.01 mm
- Weight: 14.6 kg
Features:
- Robust 2-pole AC motor (asynchronous motor)
- Sqare shape, Protection class IP54, insulation class F
- Cast bearing apron A-and B-sides
- Rated output 2.2 kW (S6-40% operation )
- Speed range 5,000 U/min ... 20,000 1/min
- SK20 Automatic tool change pneumatic (7,5 bar)
- M23 plug connection
- Clamping range 2 mm ... 13 mm
- Controlled by frequency converter (optional)
- Two precision bearings
Included:
- 1 pc. Spindle iSA2200
- 1 pc. tool holder ER20
- 1 pc. collet ER20 (6 mm)
- 1 pc. clamping nut ERM20
- 1 pc. wrench ER20 M
- 1 pc. open-end wrench SW 22
- Interconnectron connection
Datasheet (german)Manufacturer: | Responsible person: |
| Safety instructions: | ||
 | 1. | Always read and observe the safety instructions and warnings in the available documents. |
| 2. | The installation, commissioning and operation require special knowledge of machines and their proper operation, as well as basic knowledge of electrical engineering. The instructions - including those in the descriptions - must be followed carefully. | |
| 3. | The location where machines are operated must ensure that unauthorized persons - especially children - do not have access without adequate supervision. | |
| 4. | The use of kits / components usually requires additional measures and additions. | |
