Hotline: +49 (0)7227 994255-0
E-Mail: 
Diamond coated grinding points, ball 3.2 mm, 2 pieces
Description:
• Diamond-coated grinding points for drilling and processing of glass and rocks to granite
Application note:
• It is advisable to use on milling and boring machines with a speed of 2,000 rev / min with the addition of cooling liquid.
• The drilling must be frequently interrupted, so that the drill bit does not burn and enough coolant and lubricant is applied to the drilling site.
Dimensions:
• 2 x shaped ball - diameter head 3,2mm
• Diameter shaft: 2.35 mm
• optimum operating speed: 2,000 r / min
• maximum allowed speed. 60,000 U / min
• Diamond-coated grinding points for drilling and processing of glass and rocks to granite
Application note:
• It is advisable to use on milling and boring machines with a speed of 2,000 rev / min with the addition of cooling liquid.
• The drilling must be frequently interrupted, so that the drill bit does not burn and enough coolant and lubricant is applied to the drilling site.
Dimensions:
• 2 x shaped ball - diameter head 3,2mm
• Diameter shaft: 2.35 mm
• optimum operating speed: 2,000 r / min
• maximum allowed speed. 60,000 U / min
Manufacturer: | Responsible person: |
| Safety instructions: | ||
 | 1. | Always read and observe the safety instructions and warnings in the available documents. |
| 2. | The installation, commissioning and operation require special knowledge of machines and their proper operation, as well as basic knowledge of electrical engineering. The instructions - including those in the descriptions - must be followed carefully. | |
| 3. | The location where machines are operated must ensure that unauthorized persons - especially children - do not have access without adequate supervision. | |
| 4. | The use of kits / components usually requires additional measures and additions. | |