Hotline: +49 (0)7227 994255-0
E-Mail: 
Parts set ALU-Line Heavy Gantry 2507
Due to the large dimensions, profiles and recirculating ball screws with higher cross-sections are installed in the ALU-Line Heavy. Additionally, the Heavy Gantry version comes with two external X-drive spindles for twice the power.
On the X axis, the 90 x 90 profile is replaced by a 180 x 90 profile to reduce deflection to a minimum. Two linear guide rails are mounted on the 180 profile on each side in order to achieve an even higher stability of the portal.
Our machines are equipped with pre-tensioned 20 mm linear guides to reduce any vibrations that may occur.
With this kit you get all the necessary parts for the mechanical construction of the portal milling machine. The drag chains and stepper motors are not included.
Optionally available portal elevationThe illustrations show a machine with a portal heightened to 320 mm passage height and double portal cheeks. An increase to 420 mm passage height with triple portal cheeks is also available.
| Technical Data | |
|---|---|
| Travel |
X: 2550 mm |
| Clearance under Portal | 270 mm (without table) |
| Clamping area | X: 2900 mm Y: 750 mm |
| Outer dimensions |
L: 2950 mm |
| Guides | Linear Guides Size 20 on all Axis |
| Ball screw spindles |
X: 2x 25 x 20 mm Y: 16 x 10 mm Z: 16 x 5 mm |
| Weight | approx. 240 kg |
Delivery content :
 The mechanism is delivered in individual parts for self-assembly. The pictures show the fully assembled state.After completion, the parts set presented here represents what is known as an "incomplete machine" in the EC Machinery Directive. This must be supplemented by adding further components to form a finished machine. The housing and the functional safety module (operator protection) offered by Sorotec can be used for this. Also read this  Information sheet. |
- 2 x linear rails each side on the X-Axis
- 2 spindles outside on X-Axis
- Aluminium profiles and machined parts to build the machine
- linear guides and carriages size 20
- Ball screw spindles
- HTD belts and pulleyes (for 8mm shaft)
- Mechanical reference switches for all axes
- Complete set of screws
- Assembly instructions
- Mounting Kit for Electric
- Machine feet
- Stepper motors
- Controllers
- Drag chains
- Control software
- CAD/CAM Systems
- Spindles (with and without tool changer)
- Frame
- T-Slot tables
- Cooling systems
- Housing
- further accessories
Delivery time on request
The shop can not calculate shipping costs, please contact us in case of order by email or phone.
Machine parameter Alu Line Heavy GantryManufacturer: | Responsible person: |
| Safety instructions: | ||
 | 1. | Always read and observe the safety instructions and warnings in the available documents. |
| 2. | The installation, commissioning and operation require special knowledge of machines and their proper operation, as well as basic knowledge of electrical engineering. The instructions - including those in the descriptions - must be followed carefully. | |
| 3. | The location where machines are operated must ensure that unauthorized persons - especially children - do not have access without adequate supervision. | |
| 4. | The use of kits / components usually requires additional measures and additions. | |