HF-Spindle 8022 air cooled 2.2 kW ER20 + Frequency inverter Invertek ODE-3 2.2 kW 230 V 1-phase and brake resistors in a set with slight signs of usage
Spindle seet was used for test purposes only.
Only one set available.
Description
HF-Spindle 8022 air cooled 2.2 kW ER20
Here you can find our air cooled HF-Spindles. These Spindles are driven by a variable-speed asynchronous motor which is known for its excellent smooth running and constant torque characteristics even at low rotation speed.
The cooling is assured by the integrated cooling fan with a low noise which is almost not hearable below 300 Hz. At 400 Hz you can compare the fan noise with the noise of a running PC.
Due to no external cooling aggregate is necessary, the air cooled spindles are dedicated for setting up a HF-Spindle system for a very low price and easy installation.
With a weight of only 4.8 kg, a shaft driven active air cooling, and an unbeatable price, this HF-Spindle is the first choice as light milling or engraving spindle for small machines.
This is our most powerful Air cooled Motorspindle. With 2,2 kW, this spindle offers a maximum of torque reserve which can be used to chip different materials with tools up to 15 mm thanks to its ER20 collet taper. For this spindle, no additional coolant aggregates are necessary because of the integrated fan. Thanks to the asynchronous drive technique, the spindle is running very smooth and quiet, up to 12.000rpm a difference to water cooled spindles isn't even noticeable.
Includes:
- HF-Spindle HFS-8022-AC ER20
- clamping nut
Required accessories (not included):
Description
Frequency inverter Invertek ODE-3 2,2 kW 230 V 1-phase
10.5 A, IP20, integrated line filter
The compact, robust design also fits well into smaller control cabinets. For easier wiring, the connection is designed as for contactor contacts. The control can also be carried out completely at the push of a button directly on the device.
Main features:
- Integrated C1 EMC filter
- Fast commissioning and easy operation with 14 basic parameters
- Integrated brake chopper
- Dual analog inputs
- Operation up to 50 °C
- Optional for the control of all types of single-phase motors
- Modbus RTU and CANopen on board as standard
Technical specifications:
Mains frequency: 48 ... 62 Hz
Mains voltage: 200 ... 240 V ± 10%
Overload Ability: 150% for 60 seconds, 175% for 2.5 seconds
Output frequency: 0 ... 500 Hz; 0.1 Hz resolution
Typical efficiency: > 98%
Programmable inputs: 2 digital; 2 analog / digital selectable (four total)
Programmable outputs: 1 analog / digital, 1 relay (two total)
Relay outputs max voltage: 250 VAC, 30 VDC
Switching Current: 6 A AC; 5A DC
Setpoint control (analogue signal): 0 ... 10 V, 10 ... 0 V, 0 ... 20 mA, 20 ... 0 mA, 4 ... 20 mA, 20 ... 4 mA
Setpoint control (digital): motor potentiometer (keyboard), Modbus RTU, CANopen
temperature range
Storage: -40 °C ... 60 °C
Operation: -10 °C ... 50 °C
Humidity: max. 95%, non-condensing
Height: 221 mm
Width: 110 mm
Depth: 150 mm
Weight: 1,7 kg
Fastening: 4 x M5
Hotline: +49 (0)7227 994255-0
E-Mail: web1@sorotec.de