USB-CNC Controller V5-B

USBCNC is a CNC-Controller including software to drive a cnc-machine with your PC.

• 125 KHz step frequency.
• Full 6 axes interpolation.
• Euro card size 100x160mm.
• 5 status LED's.
• 6 Standard CNC outputs ( Tool, Tool direction, TOOL PWM, Flood coolant, Mist coolant, Charge PUMP for external watchdog)
• 9 Standard CNC inputs  (6 Home inputs, Probe, Spindle sensor, 2 x E-Stop, External ERROR, Run, Pause, Hand wheel).
• 10 general purpose  digital outputs (tool-changer).
• 2 Extra PWM outputs for motor speed or temperature control.
• 6 Extra digital Inputs (tool changer).
• 3 Extra  analogue Inputs 3. The extra IO is controlled by M54, M55, M66.
• Interface to PC is USB2.0.
• Optional 100 Mbit Ethernet.
• On board Power supply, input +9 – 24 Volt.
• Field upgradable firmware.
• USBCNC Software included.
• Windows XP, Windows 7.
• Runs on single core Atom PC.

Technical Data of the Controler:
Inputs:

• 2x Emergency stop
• 1x External Error
• 6x homing switches
• 1x Digital Probe
• 3x Analog input
• Handwheel input
• 1x Pause
• 1x Run
• 6x Further free programmable inputs
• USB (V2.x) from PC/Laptop
• With optional hardware with ethernet connection

Outputs:

• 6x Step / Dir / amplifier enable
• Emergency Stop
• Flood coolant
• Mist coolant
• 3x PWM
• TOOL Direction
• 9x further free programmable digital outputs

Max Step Frequency:

• 125 KHz step frequency,
• 6 Axes
• Pulse width 5 uSec. and up.

Further Info:

• PICstep compatible
• All IO buffered and filtered 
   

Features

• Shortest possible  CNC production time, especially 3D work, depending on the product, USBCNC can be up to 2 times faster . This is thanks to the advanced Look Ahead Feed Algorithm that works for all motion segments, lines and circles by looking at their curvature and reduce speed only when absolutely necessary.
• Simple one screen operation, UI designed for and by professional CNC operators.
• Nesting mode execution for multiple production.
• Optimized tooltip feed calculations for 4th axis milling, no tool breakage due to wrong tool-tip feed.
• Feed Override control while running 0-300%.
• Easy start half way in g-code file, using search method
• Slave axes, for systems with dual motors (tandem) on X, Y or Z axis.
• Special homing sequence for tandems, sets tandem straight.
• Tangential knife, you need to program only X.Y coordinates and the tangential knife follows, also in circles and lifts automatically up when needed.
• Backlash compensation.
• Spindle proportional ramp-up time.
• Collision detection when g-code job is loaded prevents machine damage.
• Running time estimation when job is loaded.
• Thread cutting (Lathe).
• OpenGL graphics allows real-time PAN/ZOOM/ROTATE
• G-code is EMC compatible, RS274NGC, can be used with all CAM software's so far.
• G-code extensions with IF..THEN, WHILE..ENDWHILE, SUB ENDSUB, GOSUB.
• G68,  Zeroing with rotation, accurate setup of clamping device no longer necessary.
• Super long file mode allows endless files,  tested with 100.000.000 lines g-code.
• User interaction from G-Code with DlgMsg command and a lot more.
• Automatic tool change can be programmed entirely in G-code.
• Pause, Jog away, resume run in middle of g-code run.
• Hand wheel jog with position and velocity mode.
• Build in 2D CAM for drilling, engraving, profiling and pocketing, reads DXF and HPGL.
• SDK for building customized UI's.

 Installation + Konfiguration USB-CNC